- Home
- Solar Lighting Systems and Kits
- Solar Garden Wall Light with Ø35 cm Elliptical Opal Globe – 3.2 V, 60 W Equivalent
Solar Garden Wall Light with Ø35 cm Elliptical Opal Globe – 3.2 V, 60 W Equivalent
Yakan Lighting
Product Code : Y.A.126104
Add Cart
How do I get an offer for products?
How do I order?
Ratio of product to human body
36x36 cm
70 cm
- Width 36x36 cm
- Height 70 cm
- Equivalent Lighting Power 60 watt
- Arms Steel
- Armature Glass Ø35 cm elliptical opal globe – P.M.M.A Acrylic
- Armature Body Polyamide 6 (PA6)
- Paint Galvanized + electrostatic powder coating
Material
- Solar system voltage: 3.2 V.
- The solar module support structure is steel.
- Remote-controlled.
- Sunlight requirement: 6–8 hours of direct sunlight.
- Average operating time: 17–20 hours.
- Approximate illuminated area: 10–25 m².
- PA6 and acrylic components resist UV radiation and outdoor weather conditions.
- Expected battery cycle life: 2,000 charge–discharge cycles.
Product Description
- This solar garden wall light is designed for decorative outdoor lighting on walls and around entrances.
- For garden, residential development and landscape projects requiring solar wall lighting, consider the lantern design and a position where the panel receives sunlight together.
- For solar wall light prices and project quotations, provide the installation location, operating requirements and quantity.
- Operating time and illuminated area may vary with sunlight, season, shading, installation position and the operating program.
- Performance expectation: When the product's use and charging conditions are met, the battery is expected to retain 100% of its initial performance for at least 5 years in energy-saving modes, and the solar panel for at least 10 years. These periods do not mark the end of service life. Performance expectations are separate from the product warranty.
- 2-year warranty.
Important installation notice for solar LED luminaires: Because of product weight and wind loads, the customer is responsible for ensuring that the mounting surface (wall, roof, facade, pole, etc.) has adequate structural load-bearing capacity. Our company accepts no liability for detachment, toppling or damage caused by an inadequate mounting surface or structure.
!! IMPORTANT INFORMATION !!
The product must be installed by a qualified electrician.