- Home
- Solar Lighting Systems and Kits
- Solar Street Light – YKN Green Power, 3.2 V, 70 W Equivalent
Solar Street Light – YKN Green Power, 3.2 V, 70 W Equivalent
Yakan Lighting
Product Code : Y.A.127020
Add Cart
How do I get an offer for products?
How do I order?
- Weight 2 kg
- Equivalent Lighting Power 70 watt
- Arms Steel
- Armature Glass P.M.M.A Acrylic optical lens
- Armature Body Aluminium
- Paint Electrostatic powder coating
Material
- Solar system voltage: 3.2 V.
- Monocrystalline solar panel power: 7 W.
- Battery: two 6 Ah LiFePO4 battery groups.
- LED: Nichia, 6500 K.
- Maximum luminous flux: 2,400 lm.
- Motion-sensor operation with high and dimmed light levels.
- Remote-controlled.
- Sunlight requirement: 6–8 hours of direct sunlight.
- Average operating time: 17–20 hours.
- Approximate illuminated area: 80 m².
- Luminaire dimensions: 190 × 260 × 40 mm.
- Recommended mounting height: 3–4 m.
- Expected battery cycle life: 2,000 charge–discharge cycles.
- Ingress protection: IP66.
- Electrical protection: Class III.
- Impact resistance: IK08 (metal body).
Product Description
- A solar street light can be considered as an alternative to mains-connected lighting in parks, residential access roads and around facilities.
- Select a solar road lighting luminaire by considering panel sunlight exposure, mounting height and the required night-time operating program together.
- For solar street light prices, provide the installation location, project quantity and lighting requirements.
- Operating time and illuminated area may vary with sunlight, season, shading, installation position and the operating program.
- Performance expectation: When the product's use and charging conditions are met, the battery is expected to retain 100% of its initial performance for at least 5 years in energy-saving modes, and the solar panel for at least 10 years. These periods do not mark the end of service life. Performance expectations are separate from the product warranty.
- 2-year warranty.
Important installation notice for solar LED luminaires: Because of product weight and wind loads, the customer is responsible for ensuring that the mounting surface (wall, roof, facade, pole, etc.) has adequate structural load-bearing capacity. Our company accepts no liability for detachment, toppling or damage caused by an inadequate mounting surface or structure.
!! IMPORTANT INFORMATION !!
The product must be installed by a qualified electrician.