YKN Green Power 3.2 V Solar Power Supply Kit with External Panel – 70 W Equivalent

  • Equivalent Lighting Power 70 watt
  • Arms Steel
  • Armature Body Aluminium
  • Paint Electrostatic powder coating
Material
  • Solar system voltage: 3.2 V.
  • System enclosure dimensions: 23 × 12 × 8 cm.
  • Panel dimensions including supports: 43 × 30 cm.
  • The steel panel support is adjustable up to 45°.
  • A 3 m extendable solar cable option is available.
  • Remote-controlled.
  • Sunlight requirement: 6–8 hours of direct sunlight.
  • Average operating time: 17–20 hours.
  • Operating time may vary with the power of the connected LED lighting unit and the operating program.
  • Expected battery cycle life: 2,000 charge–discharge cycles.
  • Ingress protection: IP66.
  • Electrical protection: Class III.
  • Impact resistance: IK08 (metal body).
Product Description
  • This solar power supply kit with an external panel uses a solar panel, battery and control system to supply a compatible lighting unit.
  • When selecting a solar power kit for LED lighting, establish the connected luminaire's system compatibility and night-time operating program together.
  • For solar power supply kit prices, provide the LED lighting unit you intend to use, the installation location and your operating requirements.
  • The LED lighting unit is not included; request a compatible LED luminaire separately.
  • Operating time and illuminated area may vary with sunlight, season, shading, installation position and the operating program.
  • Performance expectation: When the product's use and charging conditions are met, the battery is expected to retain 100% of its initial performance for at least 5 years in energy-saving modes, and the solar panel for at least 10 years. These periods do not mark the end of service life. Performance expectations are separate from the product warranty.
  • 2-year warranty.

Important installation notice for solar LED luminaires: Because of product weight and wind loads, the customer is responsible for ensuring that the mounting surface (wall, roof, facade, pole, etc.) has adequate structural load-bearing capacity. Our company accepts no liability for detachment, toppling or damage caused by an inadequate mounting surface or structure.

  • Tolerance up to + - 10% in product dimensions.
  • !! IMPORTANT INFORMATION !!
    The product must be installed by a qualified electrician.