Triple Solar Bollard Light Set – YKN Green Power, Square Cube, 70 cm, 3.2 V, 3 × 10 W Equivalent

Yakan Lighting Product Code : Y.A.126515
Add Cart How do I get an offer for products? How do I order?
Ratio of product to human body
orantı
10x10 cm
70 cm
Triple Solar Bollard Light Set – YKN Green Power, Square Cube, 70 cm, 3.2 V, 3 × 10 W Equivalent
  • Width 10x10 cm
  • Height 70 cm
  • Equivalent Lighting Power 3 × 10 watt
  • Armature Glass P.M.M.A Acrylic
  • Armature Body Steel
  • Paint Electrostatic powder coating
Material
  • Solar system voltage: 3.2 V.
  • Remote-controlled.
  • Sunlight requirement: 6–8 hours of direct sunlight.
  • Average operating time: 17–20 hours.
  • Total approximate illuminated area: 40 m².
  • Expected battery cycle life: 2,000 charge–discharge cycles.
  • Ingress protection: IP66.
  • Electrical protection: Class III.
  • Impact resistance: IK08 (metal body).
Product Description
  • This three-light solar garden lighting set supplies three luminaires from one system for gardens and walkways.
  • When selecting a solar bollard lighting set, consider luminaire positions alongside the cable routes from the panel to the luminaires.
  • For solar pathway lighting set prices, provide the site layout, number of sets required and operating requirements.
  • Operating time and illuminated area may vary with sunlight, season, shading, installation position and the operating program.
  • Performance expectation: When the product's use and charging conditions are met, the battery is expected to retain 100% of its initial performance for at least 5 years in energy-saving modes, and the solar panel for at least 10 years. These periods do not mark the end of service life. Performance expectations are separate from the product warranty.
  • 2-year warranty.

Important installation notice for solar LED luminaires: Because of product weight and wind loads, the customer is responsible for ensuring that the mounting surface (wall, roof, facade, pole, etc.) has adequate structural load-bearing capacity. Our company accepts no liability for detachment, toppling or damage caused by an inadequate mounting surface or structure.

  • Tolerance up to + - 10% in product dimensions.
  • !! IMPORTANT INFORMATION !!
    The product must be installed by a qualified electrician.